THE KROGEN 58' REPRESENTS A GIANT STEP FORWARD, both for this builder and for the industry as a whole. Nothing has been spared to bring her to fruition, from the intellectual rigor applied to arrive at the best possible design, to the care in the selection of the very best construction methods and materials.
First and foremost, the Krogen 58' is a home away from home, even a primary home, as the case could be. Every comfort has been provided. There's never the need to leave the nest to travel - you just take it with you, practically anywhere in the world you can find a fathom (or less) of water.
The 58' is as perfectly suited for those new to the cruising world as it is for "old salts". She's solid and sure in the open ocean, with systems chosen for their reliability and simplicity of operation. The Krogen 58' could just as capably take you from Annapolis to Athens, as from Nantucket to Newport. Whatever the destination, this capable trawler yachts is ready to go and is truly, at home on any sea.
Specs
Length Overall (LOA) 63' 3"
Length on Deck (LOD) 58' 0"
Length at Waterline (LWL) 52' 3"
Beam (Molded) 18' 1"
Beam (Over Rub Rail) 18' 10"
Draft (Designed Water Line - DWL) 5' 3"
single screw option 6' 3"
Displacement (DWL with Half Load) 96,830 lb.
Ballast (Encapsulated Lead) 7,000 lb.
Fuel 1,760 gal.
Water 400 gal.
Approximate Bridge Clearance
with Mast Up (Standard Mast) 25' 5"
with Mast Down (Standard Mast) 15' 9"
(DWL to top of flybridge coaming)
Hull and superstructure molds from high-grade female tooling.
Hull construction includes use of USA-made, Cook® gel coat; Knytex (in combination with mat and Airex®) above waterline; solid fiberglass lamination below waterline, with blister-resistant vinylester resins utilized on first laminates. Impact resistant aramid/FRP reinforced stem and stern bottom areas.
Superstructure includes Knytex® and mat (in combination with end-grain balsa and/or Divinycell® cores) and surface mats for print-through reduction.
Teak aft and side decks. Boat and fore decks have GripTex® non-skid finish. Bulwark has molded plank lines with gel coat finish.
Polyurethane formulate marine sealants used at hull-to-deck, boat deck joints and exterior fittings.
Marine-grade plywood bulkheads with molded fiberglass hat section stringers.
Interior finished with handcrafted solid cherry, Formica® and veneers.
Engines: (2) Tier II John Deere®, #6068TFM, 158 bhp @ 2400 rpm with Twin Disc® 2.88:1 ratio gears
Engine Mounts: AquaDrive® anti-vibration system
Fuel Filters: Dual Racor® w/ vacuum gauge for each engine, Dual Racor® w/ vacuum gauge for each generator
Fuel polishing system with transfer pump
Generators: 20kW Northern Lights® with sound shield (includes hydraulic PTO for ATB hydraulic system) and 12kW Northern Lights® with sound shield
Shafts: (2) Aquamet® 22, 2" diameter
Propellers: (2) bronze, 4-bladed, 32” diameter, 24” pitch
Rudders: stainless steel with protective shoe
Bilge Pumps: (5) @ 2,000 gallons-per-hour
Muffler: fiberglass
Steering: hydraulic (s-station)
Controls: ZF Mathers MicroCommander®, electronic (3-station)
Bow Thruster: American Bow Thruster® 25hp hydraulic with proportional controls (3-station)
Stabilizers: American Bow Thruster® TRAC® system, 9 sq. ft. fins
Electrical Panel: 120/240-volt AC and 12/24-volt DC, with tinned wiring and circuit breakers
Battery Boxes: fiberglass
Batteries: (8) 6-volt engine starting, (2) 12-volt generator starting, (12) 6-volt ship service and (2) 12-volt navigation/communication/electronic bank
Battery Charger: (1) 120/24-volt, (1) 120/12-volt
Inverter: Trace® 4kW (with 24-volt battery charger)
Bonding System
Shore Power Inlets: (2) 50 amp, fore and (2) 75-foot Glendinning® CableMaster reels, aft
Water Piping: copper, insulated
Dockside Water Pressure Regulator
Pressure Water System: Variable rate 24VDC in line with 120 VAC fresh water pump
Water Heater: 30-gallon capacity
Oil Exchange System: main engines, generators and transmissions
Water Tank: (1) stainless steel
Holding Tank: fiberglass, 100-gallon capacity
Engine Room: fire suppression system
Doors: Freeman® weather-tight, double in saloon, single Dutch-style in galley and pilothouse
Windows: (powder coated aluminum, 7 sliding, 5 fixed
Hatches: (4)
Ports: stainless steel with screens
Grab Rail: stainless steel on starboard passageway
Side Boarding Door: (1)
Thru-Hulls & Seacocks: bronze
Hawse Pipes and Mooring Cleats: stainless steel
Aft Deck
Cap Rail: teak
Transom Door
Transom Shower: hot/cold fresh water
Swim Platform: fiberglass
Lazarette
Emergency Tiller
Convenience Cabinet: sink with storage and (2) remote-controlled Glendinning® CableMasters
Side Boarding Door: (1)
Portuguese Bridge
Wing Station with bow thruster and engine controls
Boarding Doors: (2)
Flybridge/Boat Deck
Propane Tanks: (2) aluminum, 20-lb. capacity cylinders in Trident Marine® locker
Boat Deck Railings: welded stainless steel
Mast/Rigging: aluminum, painted and hinged, with masthead, steaming and spreader lights, plus shrouds
Wheel: stainless steel, destroyer-type
Air Horn: Kalhenberg® with automatic fog-horn whistle
Davit: Nautical Structures® Euro 1,200 lb. lift capacity with auto rotation
Compass
Bow
Bow Railings: welded stainless steel
Bowsprit and Pulpit with (2) Anchor Rollers
Salt Water Washdown Pump
Windlass: Maxwell®, 3500, hydraulic with dual chain wheel and captstan
Freeman® Water Tight Anchor Locker Deck Hatch
Air Conditioning: (5 zone, 78,000 total BTU
Lighting: Cantalupi®
Cherry and holly soles in pilothouse. Cherry parquet soles in saloon and cabins
TV/Telephone Jacks: 4 locations
Custom decor allowance
Saloon/Galley
Settee: L-shaped starboard with storage
Table: cherry, fold-out top with high-low base
Valances: cherry
Drapery Fabric: Don®, color "Natural"
Upholstery Fabric: Shelby®/C, color "Natural"
Bookcase/Storage Unit: cherry
Ice Maker: Raritan Icer-Ette® (in bookcase)
Galley Appliances: stainless steel finish
Refrigerator: Jen-Air®
Convection Microwave: GE®
Trash Compactor: GE®
Dishwasher: Miele®
Stove/Oven: Viking®
Sink: stainless steel, double basin
Counter Tops: Corian®, color "Sahara"
Pilothouse
Stidd® Helm Chair
Compass
Rudder Angle Indicator
Windshield Wipers and Washers: Exalto® with 3-wiper synchronization
Wheel: stainless steel, destroyer-type
Watch Berth: converts to double
Watch Berth Table: cherry, hi-low
Overhead Electronics Cabinet
Overhead Lights: red/white combination
Electronic Console: cherry, raised
Chart Drawers
Chart Lights: 2
Holding Tank Status Panel: Tankwatch4®
Staterooms
Master: island queen with en suite head
Starboard Guest: choice of twin beds or queen
Port Arrangement: stateroom/den or dedicated office layout
Heads (2)
Toilets: household size Sealand VacuFlush® with Status Panel
Showers: molded fiberglass with bi-fold door
Counter Tops: Corian®, color "Sahara"
Companionway
Washer/Dryer: stack unit
Engine Room
Workbench
Sound Insulated: Soundown® MFG. Quietech Perforated Aluminum
Blower: centrifugal
Doors: Freeman® weather-tight, forward, water tight hatch aft
Single Screw Option Available
Equipment and specifications would include those listed above, with the following exceptions:
Engine: Lugger® 6125A, 325 bhp @ 2100 rpm with Twin Disc® w/2.95:1 ratio gear
Shaft: (1) Aquamet® 22, 2-3/4" diameter
Propeller: HyTorq® (1) bronze, 3-bladed, 38" diameter, 28" pitch
Fuel Tanks: (2) aluminum, 1,810-gallon capacity with sight gauges
Batteries: (4) 6-volt engine starting, (2) 12-volt generator starting, (12) 6-volt ship service and (2) 12-volt navigation/communication/electronic bank
RANGE
6 knots: 5,690 Nautical Miles
7 knots: 3,840 Nautical Miles
8 knots: 2,590 Nautical Miles
9 knots: 1,780 Nautical Miles
10 knots: 1,240 Nautical Miles
NOTE: Calculated with a 10% reserve. Ranges
are approximate.
HYDROSTATIC
Displacement/Length Ratio (D/L) 303
Above/Below Water Area Ratio (A/B) 2.6
single screw option 2.4
Prismatic Coefficient (PC) .64
Pounds-Per-Inch Immersion 3,425 lb.
Moment-to-Trim One Inch 10,070 ft. lb.
Longitudinal Center of Buoyancy (LCB) 52.5% (Aft)
single screw option 53.2% (Aft)
Longitudinal Center of Flotation (LCF) 55.9% (Aft)
THE KROGEN 58' REPRESENTS A GIANT STEP FORWARD, both for this builder and for the industry as a whole. Nothing has been spared to bring her to fruition, from the intellectual rigor applied to arrive at the best possible design, to the care in the selection of the very best construction methods and materials.
First and foremost, the Krogen 58' is a home away from home, even a primary home, as the case could be. Every comfort has been provided. There's never the need to leave the nest to travel - you just take it with you, practically anywhere in the world you can find a fathom (or less) of water.
The 58' is as perfectly suited for those new to the cruising world as it is for "old salts". She's solid and sure in the open ocean, with systems chosen for their reliability and simplicity of operation. The Krogen 58' could just as capably take you from Annapolis to Athens, as from Nantucket to Newport. Whatever the destination, this capable trawler yachts is ready to go and is truly, at home on any sea.
Specs
Length Overall (LOA) 63' 3"
Length on Deck (LOD) 58' 0"
Length at Waterline (LWL) 52' 3"
Beam (Molded) 18' 1"
Beam (Over Rub Rail) 18' 10"
Draft (Designed Water Line - DWL) 5' 3"
single screw option 6' 3"
Displacement (DWL with Half Load) 96,830 lb.
Ballast (Encapsulated Lead) 7,000 lb.
Fuel 1,760 gal.
Water 400 gal.
Approximate Bridge Clearance
with Mast Up (Standard Mast) 25' 5"
with Mast Down (Standard Mast) 15' 9"
(DWL to top of flybridge coaming)
Hull and superstructure molds from high-grade female tooling.
Hull construction includes use of USA-made, Cook® gel coat; Knytex (in combination with mat and Airex®) above waterline; solid fiberglass lamination below waterline, with blister-resistant vinylester resins utilized on first laminates. Impact resistant aramid/FRP reinforced stem and stern bottom areas.
Superstructure includes Knytex® and mat (in combination with end-grain balsa and/or Divinycell® cores) and surface mats for print-through reduction.
Teak aft and side decks. Boat and fore decks have GripTex® non-skid finish. Bulwark has molded plank lines with gel coat finish.
Polyurethane formulate marine sealants used at hull-to-deck, boat deck joints and exterior fittings.
Marine-grade plywood bulkheads with molded fiberglass hat section stringers.
Interior finished with handcrafted solid cherry, Formica® and veneers.
Engines: (2) Tier II John Deere®, #6068TFM, 158 bhp @ 2400 rpm with Twin Disc® 2.88:1 ratio gears
Engine Mounts: AquaDrive® anti-vibration system
Fuel Filters: Dual Racor® w/ vacuum gauge for each engine, Dual Racor® w/ vacuum gauge for each generator
Fuel polishing system with transfer pump
Generators: 20kW Northern Lights® with sound shield (includes hydraulic PTO for ATB hydraulic system) and 12kW Northern Lights® with sound shield
Shafts: (2) Aquamet® 22, 2" diameter
Propellers: (2) bronze, 4-bladed, 32” diameter, 24” pitch
Rudders: stainless steel with protective shoe
Bilge Pumps: (5) @ 2,000 gallons-per-hour
Muffler: fiberglass
Steering: hydraulic (s-station)
Controls: ZF Mathers MicroCommander®, electronic (3-station)
Bow Thruster: American Bow Thruster® 25hp hydraulic with proportional controls (3-station)
Stabilizers: American Bow Thruster® TRAC® system, 9 sq. ft. fins
Electrical Panel: 120/240-volt AC and 12/24-volt DC, with tinned wiring and circuit breakers
Battery Boxes: fiberglass
Batteries: (8) 6-volt engine starting, (2) 12-volt generator starting, (12) 6-volt ship service and (2) 12-volt navigation/communication/electronic bank
Battery Charger: (1) 120/24-volt, (1) 120/12-volt
Inverter: Trace® 4kW (with 24-volt battery charger)
Bonding System
Shore Power Inlets: (2) 50 amp, fore and (2) 75-foot Glendinning® CableMaster reels, aft
Water Piping: copper, insulated
Dockside Water Pressure Regulator
Pressure Water System: Variable rate 24VDC in line with 120 VAC fresh water pump
Water Heater: 30-gallon capacity
Oil Exchange System: main engines, generators and transmissions
Water Tank: (1) stainless steel
Holding Tank: fiberglass, 100-gallon capacity
Engine Room: fire suppression system
Doors: Freeman® weather-tight, double in saloon, single Dutch-style in galley and pilothouse
Windows: (powder coated aluminum, 7 sliding, 5 fixed
Hatches: (4)
Ports: stainless steel with screens
Grab Rail: stainless steel on starboard passageway
Side Boarding Door: (1)
Thru-Hulls & Seacocks: bronze
Hawse Pipes and Mooring Cleats: stainless steel
Aft Deck
Cap Rail: teak
Transom Door
Transom Shower: hot/cold fresh water
Swim Platform: fiberglass
Lazarette
Emergency Tiller
Convenience Cabinet: sink with storage and (2) remote-controlled Glendinning® CableMasters
Side Boarding Door: (1)
Portuguese Bridge
Wing Station with bow thruster and engine controls
Boarding Doors: (2)
Flybridge/Boat Deck
Propane Tanks: (2) aluminum, 20-lb. capacity cylinders in Trident Marine® locker
Boat Deck Railings: welded stainless steel
Mast/Rigging: aluminum, painted and hinged, with masthead, steaming and spreader lights, plus shrouds
Wheel: stainless steel, destroyer-type
Air Horn: Kalhenberg® with automatic fog-horn whistle
Davit: Nautical Structures® Euro 1,200 lb. lift capacity with auto rotation
Compass
Bow
Bow Railings: welded stainless steel
Bowsprit and Pulpit with (2) Anchor Rollers
Salt Water Washdown Pump
Windlass: Maxwell®, 3500, hydraulic with dual chain wheel and captstan
Freeman® Water Tight Anchor Locker Deck Hatch
Air Conditioning: (5 zone, 78,000 total BTU
Lighting: Cantalupi®
Cherry and holly soles in pilothouse. Cherry parquet soles in saloon and cabins
TV/Telephone Jacks: 4 locations
Custom decor allowance
Saloon/Galley
Settee: L-shaped starboard with storage
Table: cherry, fold-out top with high-low base
Valances: cherry
Drapery Fabric: Don®, color "Natural"
Upholstery Fabric: Shelby®/C, color "Natural"
Bookcase/Storage Unit: cherry
Ice Maker: Raritan Icer-Ette® (in bookcase)
Galley Appliances: stainless steel finish
Refrigerator: Jen-Air®
Convection Microwave: GE®
Trash Compactor: GE®
Dishwasher: Miele®
Stove/Oven: Viking®
Sink: stainless steel, double basin
Counter Tops: Corian®, color "Sahara"
Pilothouse
Stidd® Helm Chair
Compass
Rudder Angle Indicator
Windshield Wipers and Washers: Exalto® with 3-wiper synchronization
Wheel: stainless steel, destroyer-type
Watch Berth: converts to double
Watch Berth Table: cherry, hi-low
Overhead Electronics Cabinet
Overhead Lights: red/white combination
Electronic Console: cherry, raised
Chart Drawers
Chart Lights: 2
Holding Tank Status Panel: Tankwatch4®
Staterooms
Master: island queen with en suite head
Starboard Guest: choice of twin beds or queen
Port Arrangement: stateroom/den or dedicated office layout
Heads (2)
Toilets: household size Sealand VacuFlush® with Status Panel
Showers: molded fiberglass with bi-fold door
Counter Tops: Corian®, color "Sahara"
Companionway
Washer/Dryer: stack unit
Engine Room
Workbench
Sound Insulated: Soundown® MFG. Quietech Perforated Aluminum
Blower: centrifugal
Doors: Freeman® weather-tight, forward, water tight hatch aft
Single Screw Option Available
Equipment and specifications would include those listed above, with the following exceptions:
Engine: Lugger® 6125A, 325 bhp @ 2100 rpm with Twin Disc® w/2.95:1 ratio gear
Shaft: (1) Aquamet® 22, 2-3/4" diameter
Propeller: HyTorq® (1) bronze, 3-bladed, 38" diameter, 28" pitch
Fuel Tanks: (2) aluminum, 1,810-gallon capacity with sight gauges
Batteries: (4) 6-volt engine starting, (2) 12-volt generator starting, (12) 6-volt ship service and (2) 12-volt navigation/communication/electronic bank
RANGE
6 knots: 5,690 Nautical Miles
7 knots: 3,840 Nautical Miles
8 knots: 2,590 Nautical Miles
9 knots: 1,780 Nautical Miles
10 knots: 1,240 Nautical Miles
NOTE: Calculated with a 10% reserve. Ranges
are approximate.
HYDROSTATIC
Displacement/Length Ratio (D/L) 303
Above/Below Water Area Ratio (A/B) 2.6
single screw option 2.4
Prismatic Coefficient (PC) .64
Pounds-Per-Inch Immersion 3,425 lb.
Moment-to-Trim One Inch 10,070 ft. lb.
Longitudinal Center of Buoyancy (LCB) 52.5% (Aft)
single screw option 53.2% (Aft)
Longitudinal Center of Flotation (LCF) 55.9% (Aft)
0 comments:
Post a Comment